On 2/7/2016, Edward Vandyk wrote:
"I recently picked up a set of MGA Andrex and am going to fit them to an early Twin Cam. Your FS-125 shows the upper bracket in situ but I thought you might like photos of the bracket off the car. It appears it might be 'handed' because it has a very slight twist in it. I only have the one, another is being fabricated without a twist and this should resolve the handed question. The shockers have AHH 5609 written on them. There is a packing plate for the Andrex itself as well. Mounting bracket .... thickness is 6mm".