PART NO. SPL.PAGE DESCRIPTION
BHA4067 15.S.1 Tyre pump and connection -(tool kit, 1500)
BHA4067 16.S.1 Pump -tyre with connection -(tool kit, 1600 and 1600-MK-II)-
Fin.(C)93547
BHA4067 TC.S.1 Pump -tyre with connection -(tool kit, Twin Cam)
This is the Sutty tire pump supplied with early model MGA. It is identified by the fold-out heavy wire feet and the word SUTTY cast in raised lettering on the bottom. Note position of the hose connector coming out the side straight up.
Period accessory from a swap meet.

MADE IN
"SUTTY"
ENGLAND

I believe the wire feet have been re-assembled upside down, and
the turned up loops should be turned down (like the upper photos).


For those needing to repair or restore the tire pump, we have found a source for the proper leather pressure washer at www.silca.cc.
Photo below courtesy of Bob Shafto in New Hudson, MI, USA
The tire pump replacement hoses may have a different size than the old Shutty pumps.
The hose base fitting at left is correct as original.
The hose base fitting at right is an incorrect replacement part.

|