|
This is a summary list of all parts called "STUD" used in the MGA, with original factory part numbers in alpha-numeric order. Many will be threaded on both ends, commonly fine thread on top end and coarse thread on bottom end (but not always). Others will be threaded on one end only with a special head on the other end. Once you find your part number on this page, you can look on the following page for dimensions and additional information. With such information in hand, you may be able to find some of these parts at a local auto parts store.
PART NO. SPL.PAGE DESCRIPTION
1G4359 15.K.1 Stud -wheel (front hubs disc wheels) (8)
1G7435 15.H.2 Stud for wheel (disc wheels only)(8) -(rear axle, 1500)
1G7435 16.H.2 Stud -wheel (disc wheels only)(8) -(rear axle, 1600 and 1600-MK-II)-
part no. change (was erroneously ATB7074 and BTB115)
2A7226 16.H.1 Stud -gear carrier (10) -(rear axle, 1600 and 1600-MK-II)
2A7226 16.H.5 Stud -gear carrier (10) -(rear axle, ARDB model, 1600 and 1600-MK-II)
-Com.(C)91240
2A7226 TC.H.1 Stud for gear carrier (10) -(rear axle, Twin Cam)
51K245 sup.1 Stud -cylinder head -long (4) -(block assy, engine unit, sup)
51K245 16.A.1 Stud -cylinder head -long (4) -(block assy, engine unit, 1600)
51K245 16.A.21 Stud -cylinder head (long) (4) -(block assy, engine unit, 1622)
51K246 15.A.1 Stud for cylinder head (short) -(block assy, engine unit, 1500)
51K246 sup.1 Stud -cylinder head -short (7) -(block assy, engine unit, sup)
51K246 16.A.1 Stud for cylinder head (short) (7) -(block assy, engine unit, 1600)
51K246 16.A.21 Stud -cylinder head (short) (7) -(block assy, engine unit, 1622)
51K267 15.A.1 Stud for oil pump, short (2) -[Fin(E)GB46341 except 46045 to 46100]
51K267 15.A.1 Stud for oil pump, short (3) -[Com(E)GB46045 to 46100, then 46342 on]
51K267 sup.1 Stud -oil pump (3) -(block assy, engine unit, sup)
51K267 16.A.1 Stud -oil pump (short) (3) -(block assy, engine unit, 1600)
51K267 16.A.21 Stud -oil pump (short) (3) -(block assy, engine unit, 1622)
51K881 15.A.5 Stud for rocker bracket (short)(2) -(engine unit, 1500)
51K881 sup.5 Stud -rocker bracket -short (2) -(engine unit, sup)
51K881 16.A.5 Stud -rocker bracket -short (2) -(engine unit, 1600)
51K881 16.A.26 Stud -rocker bracket -short (2) -(engine unit, 1622)
51K886 15.H.1 Stud (4) (differential carrier, rear axle, 1500)
51K886 16.H.1 Stud -bearing cap (4) -(differential, rear axle, 1600 and 1600-MK-II)
51K886 16.H.5 Stud -bearing cap (4) -(differential, rear axle, ARDB model 1600 and
1600-MK-II) -Com.(C)91240
51K886 TC.F.1 Stud -bearing cap (4) -(differential, rear axle, Twin Cam)
51K889 15.A.1 Stud for oil pump (long) [Fin(E)GB46044 except 46101 to 46341]
51K890 15.A.1 Stud for oil pump (short)[Fin(E)GB46044 except 46101 to 46341]
51K890 sup.1 Stud -oil pump (2) -(block assy, engine unit, sup)
51K893 15.A.5 Stud for rocker bracket (long) (2) -(cyl.head, engine unit, 1500)
51K893 sup.5 Stud -rocker bracket -long (2) -(cyl.head, engine unit, sup)
51K893 16.A.5 Stud -rocker bracket -long (2) -(cyl.head, engine unit, 1600)
51K893 16.A.26 Stud -rocker bracket -long (2) -(cyl.head, engine unit, 1622)
51K894 15.A.1 Stud for main bearing cap (6) -(cyl.block, engine unit, 1500)
51K894 16.A.21 Stud -main bearing (6) -(cyl.block, engine unit, 1622)
51K894 15.A.1 Stud -main bearing cap (6) -(block assy, engine unit, sup)
51K894 TC.A.1 Stud for main bearing cap (6) -(cyl.block assy, engine, Twin Cam)
52K485 15.F.1 Stud - front cover (gearbox) - changed to 53K2172 Com.(G)A916
52K487 15.F.1 Stud - gearbox extension (1) - Fin.(G)A915 -
change to CHS2513 (2) Com.(G)A916
52K531 15.A.5 Stud for water outlet elbow (3) -(cyl.head, engine unit 1500)
52K531 15s.A.5 Stud -water outlet elbow (3) -(cyl.head, engine unit 1500)
52K2171 15.A.4 Stud for tachometer pinion housing
52K2236 15.A.16 Stud - carburetor to induction manifold (4) - (exhaust and inlet, 1500)
53K249 15.A.7 Stud -L/H side crankcase blanking plate (2) [Fin(E)GB706]
53K257 15.A.7 Stud -L/H side crankcase blanking [Com(E)GB707 Fin(E)GB51767]
53K257 sup.1 Stud -petrol pump blanking plate (2) -(block assy, engine unit, sup)
53K257 16.A.1 Stud -crankcase vent pipe clip (2) -(block assy, engine unit, 1600)
53K257 16.A.21 Stud -crankcase vent pipe clip (2) -(block assy, engine unit, 1622)-
Correction was [53H275
53K257 TC.A.1 Stud for plate (2) -(fuel pump port, cyl.block assy, engine, Twin Cam)
53K486 sup.5 Stud -exhaust manifold (2) -(engine unit, sup)
53K486 16.A.5 Stud -exhaust manifold (2) -(engine unit, 1600)
53K490 15.A.6 Stud -inlet and exhaust manifold to cylinder head (4)
53K490 16.A.5 Stud -inlet and exhaust manifold to cylinder head (4) -(engine, 1600)
53K490 16.A.26 Stud -inlet and exhaust manifold to cylinder head (4) -(engine, 1622)
53K531 sup.A.5 Stud -water outlet elbow (3) -(engine unit, sup)
53K531 16.A.5 Stud -water outlet elbow (3) -(engine unit, 1600)
53K531 16.A.26 Stud -water outlet elbow (3) -(engine unit, 1622)
53K2171 sup.7 Stud -housing (2) -(tach drive, engine unit, sup)
53K2171 16.A.1 Stud -tachometer drive spindle housing (2) -(cyl.block, eng.unit, 1600)
53K2171 16.A.21 Stud -tachometer drive spindle housing (2) -(cyl.block, eng.unit, 1622)
53K2172 15.F.1 Stud -front cover (gearbox, 1500) -Com.(G)A916 -(was 52K485)
53K2172 TC.F.1 Stud -front cover (7) -(gbx.casing, gearbox assy, Twin Cam)
53K2236 16.A.15 Stud -carburetor to manifold (4) -(engine unit 1600)
AEH194 15.A.16 Stud for exhaust pipe flange (3) -(exhaust and inlet manifold, 1500)
AEH194 16.A.15 Stud -exhaust pipe flange (3) -(inlet and exhaust manifold, 1600)
AEH194 TC.A.21 Stud for outlet flange (6) -(exhaust manifold, engine, Twin Cam)
AEH375 TC.A.9 Stud, camshaft sprocket support plate (4) -(case front timing,
camshaft, engine, Twin Cam)
AEH390 TC.A.11 Stud for bearing cap (12) -(camshaft bearing, chwvga, cyl.head,
engine, Twin Cam)
AEH549 TC.A.1 Stud for cylinder head (10) -(cyl.block assy, engine, Twin Cam)
AEH583 TC.A.12 Stud for inlet manifold (long) (2) -(cyl.head, valves, engine, Twin
Cam) -identification No. 1
AEH601 TC.A.1 Stud for oil pump (3) -(cyl.block assy, engine, Twin Cam)
AHH5070 15.K.3 Stud -shock absorber to cross member (8) -(front suspension, 1500)
AHH5070 16.K.4 Stud -shock absorber to cross member (8) -(front suspension, 1600 and
1600-MK-II std.model)
AHH5070 TC.K.3 Stud -shock absorber to cross member (8) -(front suspension, Twin Cam)
AHH5195 15.M.3 Stud for 4-way piece to side-member
AHH5195 16.M.5 Stud - 4-way piece to side-member -(hyd.pipes+fittings, std.model
1600 and 1600-MK-II) -changed to FHS0411
AHH5299 15.A.16 Stud -inlet manifold (accelerator abutment bracket) (2) -(engine 1500)
AHH5299 16.A.15 Stud -inlet manifold (accelerator abutment bracket) (2) -(engine 1600)
AHH5805 TC.D.2 Stud -pump to bracket (2) -(pump mounting, fuel system, Twin Cam)
AHH5875 16.M.6 Stud for 5-way connection -(hyd.pipes+fittings, ARDB model 1600 and
1600-MK-II) Com.(C)91240
AHH5875 TC.M.2 Stud for 5-way connection -(hyd.pipes+fittings, Twin Cam)
ARH898 15.C.1 Stud -grille retaining -(case+grille assy, cooling system, 1500)
ARH898 16.C.1 Stud -grille retaining (upper)(2) -(grille assy, cooling system, 1600)
ARH898 TC.C.2 Stud -grille retaining (upper)(2) -(grille assy, cooling system, Twin
Cam)
ARH899 15.C.1 Stud -grille lower fixing -(case+grille assy, cooling system, 1500)
ARH899 15.R.18G Bolt -grille to shell (2) -(grille assembly, 1500)
ARH899 16.C.1 Stud -grille fixing (lower)(2) -(grille assy, cooling system, 1600)
ARH899 16.R.18G Bolt -grille to shell (2) -(grille assy, 1600 and 1600-MK-II)
ARH899 TC.C.2 Stud -grille retaining (lower)(2) -(grille assy, cooling system, Twin
Cam)
ATB4124 15.K.1 Stud -wheel (wire wheels)(12) -(hub assy, front axle+susp, 1500)
ATB7201 16.H.4 Stud -wheel (wire wheels only)(8) -(rear axle, 1600 and 1600-MK-II)
ATB7248 16.H.7 Stud -disc plate to housing (8) -(rear axle, ARDB model 1600 and
1600-MK-II) -Com.(C)91240
ATB7248 TC.H.2 Stud -disc plate to housing (8) -(rear axle, Twin Cam)
ATB7249 16.H.7 Stud -extension to housing (8) -(rear axle, ARDB model 1600 and
1600-MK-II) -Com.(C)91240
ATB7249 TC.H.2 Stud -extension to housing (8) -(rear axle, Twin Cam)
ATC4257 16.K.1 Stud -wheel - (8), disc wheels -(front axle and suspension, 1600 and
1600-MK-II Std.model)
BTB104 16.K.1 Stud -brake disc (8), disc wheels -(front axle and suspension, 1600
and 1600-MK-II Std.model) -Fin.(C)69505 (changed from studs to bolts)
BTB104 16.K.1 Stud -brake disc (8), wire wheels -(front axle and suspension, 1600
and 1600-MK-II Std.model) -Fin.(C)70275 (changed from studs to bolts)
CHS0512 TC.A.11 Stud-bearing cap to top cover (6) -(chwvga, cyl.head, engine, Twin
Cam) -was CLS0512
CHS0520 TC.A.9 Stud for water pump (3) -(case front timing, camshaft, Twin Cam)
CHS2510 16.N.11 Stud - plinth to body (4) -(stop/tail, road lamps, 1600-MK-II)-
Com.(C)101352
CHS2513 15.F.1 Stud - gearbox extension (2) -(GB casing, GB assy, 1500)
CHS2513 16.F.1 Stud - rear extension (2) -(GB casing, GB assy, 1600 and 1600-MK-II)
CHS2513 TC.A.12 Stud for exhaust manifold (6) -(cyl.head, valves, engine, Twin Cam)
CHS2513 TC.F.1 Stud gearbox extension (2) -(gbx.casing, gearbox assy, Twin Cam)
CLS0512 TC.A.11 Stud-bearing cap to top cover (6) -(chwvga, cyl.head, engine, Twin
Cam) -changed to CHS0512
CLS2511 TC.A.1 Stud for tachometer drive housing (2) -(cyl.block assy, engine, Twin
Cam)
CLS2511 TC.A.9 Stud for distributor drive housing (2) -(case front timing, engine,
Twin Cam)
CLS2512 TC.A.21 Stud for carburetor (8) -(inlet manifold, engine, Twin Cam)
CLS2613 TC.A.12 Stud for inlet manifold (short) (5) -(cyl.head, valves, engine, Twin
Cam)
FHS0411 16.M.5 Stud - 4-way piece to side member -(hyd.pipes +fittings, 1600 and
1600-MK-II) -was AHH5195
FHS2513 16.A.5 Stud -exhaust manifold to cyl.head (2) -(short, engine unit 1600)-
(was FLS2513)
FHS2513 16.A.26 Stud -exhaust manifold to cyl.head (2) -(short, engine unit 1622)
FLS2513 15.A.6 Stud for exhaust manifold (in head short) (2) (rep by FHS2513)
FLS2513 16.A.5 Stud -exhaust manifold to cyl.head (2) -(short, engine unit 1600) -
changed to FHS2513
|
